Beisler 1225-5 - Manual (Page 25)

Calling up sewing programs
–
Switch the main switch on.
The control initializes.
The seam program previously used is loaded.
– Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.
The selected seam program is loaded.
Calling up the parameter menu
–
Switch the main switch on.
The control initializes.
The previously used program appears in the display.
– Press key “P”.
The selection menu is called up.
– Press one of the keys “1, 2, 3, 4, 5, 6, 7, 8, 9, 0”.
The display changes over to the corresponding function.
Manual stacking
When the seam program is selected:
–
Press key “F2”.
The stacker makes a stacking movement.
21
1