Beisler 1225-5 - Manual (Page 53)

3.5 Connecting the foot pe dal
– Position the foot pedal 1 within easy reach.
– Make plug connection 2.
3.6 Mounting and aligning the stacker
– Approach the stacker with the holder 4 to the sewing unit.
– Screw the holder 4 on the sewing unit with two screws 5.
– Align the stacker in such a way that the smoother 6 is in parallel
position to the edge of the table top 7.
– Tighten screws 5.
– Screw earth wire 2 on the stacker.
– Attach the compressed air lines 1 and 3 to the distributor.
7
2
2 1
5 4 3 2 1 7 6
2