Beisler 1225-5 - Manual (Page 19)

3) The trousers part is sewn.
4) As soon as the workpiece has left the light barrier,the seam is
finished and both stamps 6 lower.
5) The contour guide moves upwards.
6) The swivelling device 5 transports the material out of the sewing
area.
7) The stacker clamp 8 moves to the front.
8) The stamps 6 move upwards again.
9) The trousers part is stacked.
10) Actuate foot switch 7 for removing the workpieces.
Note
In order to facilitate the material feed in the area of the sewing head
the table blowing can be engaged. (see chapter 5.5)
15
1
6 5 8 7