Beisler 1225-5 - Manual (Page 82)

5. Maintenance
Caution: Risk of injury !
Switch the main switch off.
The maintenance of the sewing unit must only be done with the
machine switched off.
The daily or weekly maintenance work (cleaning and oiling) to be
carried out by the operators of the sewing unit is described in the
operating instructions (chapter 8). This is listed in the following table
for the sake of completeness only.
Maintenance work to be carried out Operating hours
8 40 160 500
Machine head
- Remove sewing dust and thread remainders X
- Check the oil level X
- First oil change X
- Subsequent oil change every 2 years
Control box
- Remove sewing dust and thread remainders X
- Keep the fan grill clean X
Suction device
- Empty the container X
- Clean the zone under the fabric sliding sheet from sewing dust and
thread remainders X
Pneumatic system
- Check the water level in the pressure regulator X
- Clean the filter insert in the maintenance unit X
- Make leak test of the system
24