Comtech EF Data CME-5000 Manual - Manual (Page 35)

Chapter 3. INTERFACE PINOUTS
3.1 Introduction
The rear panel interface (Figures 3-1 and 3-2) provides all necessary external connections
between the MENCAP 50 and other equipment, in both standalone and redundant
configurations.
3.2 MENCAP 50 (CME-5000 and CME-5010)
Figure 3-1. MENCAP 50 Connection Interfaces – Rear Panel (Typical)
3.2.1 DC Power
Pin Definition
Center +5VDC
Outer Ring GND
3–1