Comtech EF Data CME-5000 Manual - Manual (Page 65)

Digicast Micro Encapsulator (MENCAP) Revision A
Device Management via User Interfaces MN/MENCAPEDC.IOM
4.3.10 IGMP Configuration Menu
Figure 4-30. IGMP Configuration Menu
4.4 Telnet Interface
Telnet provides a textual interface over a LAN. Most PCs have the capability to use
Telnet. To use Telnet on a Microsoft Windows
® product, click , then .
The Run dialog box is shown in Figure 4-31. In the Open: text window, enter “telnet
xxx.xxx.xxx.xxx,” where xxx.xxx.xxx.xxx is the IP address of the MENCAP 50. If the
port number has been modified from the
Standard 23 via the Terminal Interface, then the
port number must be appended with a colon to the IP address.
Figure 4-31. Starting Telnet Session
The user will be prompted to enter the user name and password to gain access to the
telnet interface.
The default username is “CEFD” and the default password is “CEFD”,
both of which are case sensitive.
NOTE
Once the menu is started, press <ENTER> and the MENCAP 50 Main Menu will display
as shown in Figure 4-32.
4-27