Comtech EF Data CME-5000 Manual - Manual (Page 55)

Digicast Micro Encapsulator (MENCAP) Revision A
Device Management via User Interfaces MN/MENCAPEDC.IOM
4.2.9 Redundancy Configuration
Figure 4-14. Redundancy Configuration page
The Redundancy Configuration page is used to configure the MENCAP 50 when part of
a 1:1 redundant system.
Mode
Specifies the whether redundancy is enabled or disabled and whether the unit is
configured to be in primary or backup mode.
Current State
Indicates the redundant status of the MENCAP 50.
Other unit’s IP Address
Specifies the other MENCAP 50’s IP address in the redundancy pair
Other unit’s MAC Address
Specifies the other MENCAP 50’s MAC address in the redundancy pair.
4-17