Comtech EF Data CME-5000 Manual - Manual (Page 78)

Digicast Micro Encapsulator (MENCAP) Revision A
IP Routing Support MN/MENCAPEDC.IOM
B.10 MPE/IP
Additional menu options have been added for special handling of the encapsulation of data:
• CRC – In normal operation, the MENCAP 50 does not calculate the CRC and
sets this field to 0x00000000. Some legacy receivers, may require the CRC to be
calculated. When this field is enabled, performance is reduced by as much as
50%. The default should be No.
• Reserved Fields – Setting this field configures the reserved bits for legacy
receivers. The default should be No.
• Set Offset – Setting this field configures the reserved bits for legacy receivers.
The default should be No.
Notes:
B-6