Appendix b. ip routing support, B.1 introduction, B.2 route configuration – Comtech EF Data CME-5000 Manual User Manual

Page 73: B.2.1 unicast routing

Advertising
background image

Appendix B. IP ROUTING

SUPPORT

B.1 Introduction

Offering state-of-the-art encapsulation based on the DVB Specification for Data
Broadcasting (EN 301 192), the MENCAP 50 provides the following configuration
features:

• IP Encapsulation per Multi-Protocol Encapsulation (EN 301 192)
• Unicast Routing
• Multicast Routing
• Section Packing and Non-Section Packing
• 1,024 Configurable Routes (10,000 configurable routes are available as an

option)

• Multicast Zones
• IP Copy
• 802.1q VLAN

B.2 Route

Configuration

Both Unicast and Multicast IP datagrams are encapsulated per the Multi-Protocol
Encapsulation specification. Routing of datagrams is accomplished by configuration of
the ME Route Table, described in the following section.

B.2.1 Unicast

Routing

Unicast routing provides point-to-point delivery of IP datagrams. Routes for Unicast IP
packets are configured according to the following:

B-1

Advertising