Comtech EF Data SNM-1000 - Manual (Page 104)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–62
3.7.15.1 Command Format
<channel_no> SETUP <feature_status>'cr'
<channel_no> <channel_no> is the channel number for the command.
Range: 1 to 30.
1 through 30 are for traffic modems attached to an SNM-1000, operating in
external traffic mode.
<feature_status> 'ENABLE' enables the SETUP capability for the selected <channel_no>.
'DISABLE disables the SETUP capability for the selected <channel _no>.
3.7.15.2 Local Command Responses
<channel_no> SETUP<feature_status>
3.7.16 Channel Type (CT)
This command determines the type of channel connected to a given control SNM-1000. It
does not have the capability of determining the modem type of a channel at another node.
3.7.16.1 Command Format
<channel_no> CT'cr'
<channel_no> Prefix channel number.
Valid range: 1 through 30.
1 through 30 are for traffic modems attached to an SNM-1000, operating in
external traffic mode.
CT Channel type.