Comtech EF Data SNM-1000 - Manual (Page 178)

SNM-1000 Node Control Modem Revision 3
Remote Control Operation MN/SNM1000.IOM
A–30
<channel no> CS <calling phone number>
<called phone number>
<status>
<cause>
<subcause>
Call Status
<phone number> Calling phone number
<dest node> Destination Node Id
<dest channel> Destination Channel No.
<status> Description
0 Path Ok
1 Channel busy
2 Failure
3 Invalid phone number
4 Normal Termination
5 Network Busy
6 Critical Fault
<cause> and Information only
<subcause>
<channel_no> MM <phone_no> <message> Multipoint Message
<phone_no> Source connection phone
number or zero.
<message> Message from source node.
A.9.2 List of Cause Codes
The complete list of Cause codes is given below. These are primarily used to determine
what description of the call termination is included in the completed call log. The NMS
and Node columns define whether the cause code is generated by the NMS or the Node,
or whether both may generate it.