Comtech EF Data SNM-1000 - Manual (Page 74)

SNM-1000 Node Control Modem Revision 3
Operation MN/SNM1000.IOM
3–32
3.4.5.1.5 MODULATOR:TX BPSK ORDERING
TX BPSK ORDERING
STANDARD
Transmit BPSK bit ordering selection. Select STANDARD or NON-STANDARD
Press[
←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change.
3.4.5.1.6 MODULATOR:MOD SPECTRUM
MOD SPECTRUM
NORMAL
Programmable vector rotation allows the operator to select NORMAL or INVERT for
spectrum reversal of the I and Q baseband channels.
Press[
←], [→], [↑], or [↓] to move the flashing cursor. Press [ENTER] to execute the
change
3.4.5.1.7 MODULATOR:TX MODE
TX MODE
BURST
Selection of BURST or CONTINUOUS. Press[
←], [→], [↑], or [↓] to move the flashing
cursor. Press [ENTER] to execute the change.
3.4.5.1.8 MODULATOR:TX SYMBOL RATE
TX SYMBOL RATE
19.200 KSPS
Status only. Selects TX Symbol Data rate.