Comtech EF Data SNM-1000 User Manual
Page 173
SNM-1000 Node Control Modem
Revision 3
Remote Control Operation
MN/SNM1000.IOM
A–25
Bulk
Consolidated Status
(continued
Where: 'pn' is the last parameter returned.
Paramete
r
Number
Parameter Name
(Command Reference)
Description
(Note 1)
(Note 1)
58
60
61
Receive Mode Selection
(ref. 'RXM_' command).
Reed-Solomon Encoder Enable
(ref. 'RSEN_' command).
Reed-Solomon Decoder Enable
(ref. 'RSDE_' command).
p58 = n, where 'n' is '2' (CONTINUOUS)
p60 = n, where 'n' is '0' (OFF,) or '1' (ON).
p61 = n, where 'n' is '0' (OFF), '1' (ON), or '2' (CORR_OFF).
Notes:
1. Parameters only valid in Transmit and Receive Continuous mode.
2. Parameters only valid in Transmit Continuous mode.
3. For any parameter other than the last parameter that is not returned, a comma (',') will be returned.