Dish Network Solo 381 - Manual (Page 59)

Chapter 9
54
Controlling Other Components
Switching Between TV and Device Volume Control
When you set up the remote to control a TV, the mute and volume buttons control the TV volume.
However, if you want to use the AUX mode to control a tuner or amplifier and the device has a
volume setting, you can set up the remote to control the device’s volume instead of the TV volume.
Be sure to set up the remote to control a device in AUX mode before using this feature.
Controlling the Amplifier’s Volume
1
Press and hold AUX for four seconds, and then let go of it. AUX will blink.
2
Press POUND (#).
3
Press the plus (+) side of VOLUME.
4
Press ZERO (0).
5
Press POUND (#). AUX flashes three times.
Now make sure the remote controls the amplifier’s volume:
6
Press SAT.
7
Press the plus (+) and minus (-) sides of VOLUME. The device’s volume changes and AUX lights
instead of TV.
381.book Page 54 Thursday, June 29, 2006 11:00 AM