Onnecting, Standard-definition tv connections, High-definition tv connections – Dish Network Solo 381 User Manual
Page 73
Chapter 11
68
Connecting to a TV
C
ONNECTING
TO
A
TV
This section describes how to connect receiver output ports to a TV. Select one of the following
methods.
Standard-Definition TV Connections
You can connect the receiver to a standard-definition (SD) TV in two ways:
•
RCA Audio/Video connections
•
S-Video and RCA Audio
1
Connect the receiver to the TV using one of the following:
•
RCA Audio/Video connection
•
S-Video and RCA Audio (Red and White)
2
Turn on the TV and receiver to make sure you have a picture.
3
Turn up the volume on the TV to make sure you have audio.
High-Definition TV Connections
The following sections described how to connect the receiver to a high-definition (HD) TV or
monitor. Use these connections if you have an over-the-air antenna connected to your receiver to
receive local HD broadcasts.
DISH DVI Connections
The DISH DVI connection provides high-quality audio and video to your HDTV or HD Monitor in
one cable.
381.book Page 68 Thursday, June 29, 2006 11:00 AM