DFI SR330-N - Manual (Page 113)

113
4
Supported Software
AHCI For F6 During Windows Setup Floppy Driver
You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows 7 / Windows Vista installation. You may
also choose to copy the installation files to a USB flash drive.
1. Click “AHCI For F6 Dur-
ing Windows Setup Floppy
Driver” on the main menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Organize menu
then click “Select All”.
3. Insert a blank formatted
floppy diskette into a floppy
disk drive or plug a USB
flash drive.