DFI SR330-N - Manual (Page 74)

74
3
BIOS Setup
Integrated Peripherals
The settings on the screen are for reference only. Your version may not be
identical to this one.
OnChip IDE Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
Item Help
Menu Level X
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
X OnChip IDE Device
X Onboard Device
X SuperIO Device
X USB Device Setting
Press Enter
Press Enter
Press Enter
Press Enter
IDE HDD Block Mode
IDE DMA Transfer Access
*** On-Chip Serial ATA Setting ***
SATA Mode
On-Chip Serial ATA
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled
Enabled
IDE
Enhanced Mode
If your IDE hard drive
supports block mode
Select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support