DFI SR330-N - Manual (Page 77)

77
3
BIOS Setup
Power On Function
This field allows you to use the keyboard or PS/2 mouse to power-
on the system.
Button only Default setting. Uses the power button to power
on the system.
Password When this option is selected, set the password you
would like to use to power-on the system in the
“KB Power On Password” field.
Hot Key When this option is selected, select the function key
you would like to use to power-on the system in
the “Hot Key Power On” field.
Mouse Left When this option is selected, double-click the left
button of the mouse to power-on the system.
Mouse Right When this option is selected, double-click the right
button of the mouse to power-on the system.
Super IO Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
Phoenix - AwardBIOS CMOS Setup Utility
Super IO Device
Item Help
Menu Level XX
↑↓→← : Move Enter: Select F1: General Help +/-/PU/PD: Value F10: Save ESC: Exit
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Power On Function
x KB Power ON Password
x Hot Key Power ON
Onboard FDC Controller
UART Mode Select
x RxD, TxD Active
x IR Transmission Delay
x UR2 Duplex Mode
x Use IR Pins
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
PWRON After PWR-Fail
Onboard Serial Port 1
Serial Port 1 use IRQ
Onboard Serial Port 2
Serial Port 2 use IRQ
Onboard Serial Port 3
Serial Port 3 use IRQ
Onboard Serial Port 4
Serial Port 4 use IRQ
BUTTON ONLY
Enter
Ctrl-F1
Enabled
Disabled
Hi, Lo
Enabled
Half
IR-Rx2Tx2
378/IRQ7
SPP
EPP 1.7
3
Off
3F8
IRQ4
2F8
IRQ3
3E8
IRQ10
2E8
IRQ11 X
X
The screen above list all the fields available in the Super IO Device submenu, for
ease of reference in this manual. In the actual CMOS setup, you have to use the
scroll bar to view the fields. The settings on the screen are for reference only. Your
version may not be identical to this one.