DFI SR330-N - Manual (Page 9)

1
Introduction
9
Rear Panel I/O
Ports
I/O Connectors
BIOS
Energy Efficient
Design
Damage Free
Intelligence
Temperature
Humidity
PCB
• 1 mini-DIN-6 PS/2 mouse port
• 1 mini-DIN-6 PS/2 keyboard port
• 2 DB-9 serial ports
• 1 DB-15 VGA port
• 1 DVI-I port (DVI-D signal only)
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line out jacks
• 3 connectors for 6 additional external USB 2.0/1.1 ports
• 2 connectors for external serial ports
• 1 LCD brightness control connector
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 LCD AUX power connector
• 1 DIO connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF connector
• 3 Serial ATA connectors
• 1 IrDA connector
• 1 40-pin IDE connector
• 1 FDD connector
• 1 parallel connector
• 1 24-pin ATX power connector
• 1 front panel connector
• 1 chassis intrusion connector
• 3 fan connectors
• Award BIOS
• 8Mbit SPI flash memory
• Supports ACPI specification 2.0/1.0
• Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse / Wake-On-USB
- Wake-On-LAN and Wake-On-Ring
- RTC timer to power-on the system
• Enhanced Intel ® SpeedStep Technology
• Intel ® Rapid Memory power management
• Dynamic FSB frequency switching
• AC power failure recovery
• Monitors CPU/system temperature and overheat alarm
• Monitors CPU(V)/3.3V/5V/12V/VBAT(V)/5VSB(V) voltages and
failure alarm
• Monitors CPU/system/2nd fan speed and failure alarm
• Read back capability that displays temperature, voltage and fan
speed
• Watchdog timer function
• 0 o C to 60 o C
• 10% to 90%
• 6-layers, microATX form factor
• 24.4cm (9.6") x 24.4cm (9.6")