DFI SR330-N - Manual (Page 73)

73
3
BIOS Setup
PEG/OnChip VGA Control
This field is used to select the graphics controller that will serve as
the primary boot device. The options are Auto, Onchip VGA and
PEG Port.
PEG Force x1
The options are Enabled and Disabled.
On-Chip Frame Buffer Size
This field is used to select the onboard VGA’s frame buffer size that
is shared from the system memory.
DVMT Mode
The options are Fixed and DVMT.
DVMT/Fixed Memory Size
This field is used to select the graphics memory size used by DVMT/
Fixed mode.
Boot Display
This field is used to select the type of display to use when the
system boots.
Panel Number
This field is used to select the type of panel that you are using.