DR Power Self-Propelled 6.75 Pro-XL (September 2010 - April 2013) - Manual (Page 48)

7 5 M E I G S R O A D , P . O . B O X 2 5 , V E R G E N N E S , V E R M O N T 0 5 4 9 1
©2011 Country Home Products, Inc. All rights reserved 291961A
Daily Checklist for the DR TRIMMER/MOWER
To help maintain your DR TRIMMER/MOWER for optimum performance, we recommend you follow this checklist each time
you use your machine.
[ ] OIL: With the machine on a level surface, check the Engine oil level with the Dipstick and add more if necessary (only add
oil to the level indicated on the Dipstick - do not overfill). Use SAE 30 high detergent motor oil.
[ ] GAS: Fill the Fuel Tank with clean, fresh, unleaded gasoline.
[ ] ENGINE AIR COOLING SYSTEM: It is very important to keep the Engine clean of debris. Remove grass and other built-
up materials from the Air Intake Screen before, during, and after you mow. Regularly remove debris from the Blower
Housing and Cooling Fins. A dirty Engine retains heat and can cause damage to the internal Engine parts.
[ ] CUTTING CORDS: Replace broken or frayed Cords.
[ ] MOW-BALL ® SUPPORT and LINE PLATES: Check the Mow-Ball ® Support and Line Plates for wear and replace as
needed.
[ ] GENERAL CONDITION: Check the general condition of the machine, e.g.; nuts, bolts, welds etc.
Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.
Disconnect the spark plug wire, keeping it away from the spark plug.