Setting up your dr 13 hp chipper, Chapter 3, Unpacking – DR Power 13 HP Towable User Manual
Page 15
CALL
TOLL
FREE
1-800-DR-OWNER 11
CHAPTER 3
SETTING UP YOUR DR 13 HP CHIPPER
This chapter outlines unpacking and a few simple steps you will need to follow to set up your new machine
before you use it. If you have any questions at all, please feel free to contact our Customer Service
Representatives at our toll free number: 1-800-DR-OWNER (376-9637).
Unpacking
NOTE: Unpacking the DR 13 HP CHIPPER is a two-person job. We recommend you have an extra set of
hands available before you begin.
Tools and Supplies Needed:
•
Gloves
•
Metal Shears (Side Cutters)
•
Eye Protection
•
Pry Bar
•
Hammer
Parts supplied on Skid:
•
(1) DR CHIPPER
•
(1) Tow Beam
•
(1) Parts Box including:
(4) 5/16" - 18 x 3/4" Carriage Bolt
(3) 5/16" - 18 x 1" Bolt
(7) 5/16" - 18, Lock Nut, Nylon
(4) 5/16" Flat Washer
(1) 1/4" - 20 x 1-1/4" U-Bolt
(2) 1/4" - 20, Lock Nut, Nylon
(1) Knife Gap Gauge
(1) Chipper Hopper
(1) Hitch Plate
(1) Safety Glasses
(1)
Safety
&
Operation
Instructions
Manual
(1) Engine Owner’s Manual
(2) Engine Key