DR Power 13 HP Towable - Manual (Page 16)

12 DR
® 13 HP CHIPPER
•
WEAR EYE PROTECTION WHEN CUTTING THE BANDING. THE BANDING MAY HAVE A LOT OF
TENSION ON IT AND MAY SNAP AND CUT YOU. ALWAYS STAND TO ONE SIDE WHEN CUTTING THE
BAND.
•
STABILIZE THE SHIPPING CONTAINER ON CLEAN FLAT TERRAIN BEFORE ATTEMPTING TO
UNPACK AND ASSEMBLE THE MACHINE.
1. Pry off the crate and cut any bands holding the machine to the pallet.
Be careful when cutting the banding.
2. Remove the Tow Beam and Parts Box containing the Chipper Hopper, Hitch Plate, and a plastic bag
containing the assembly hardware, manuals, etc. from the shipping container.
3. With the help of another person, carefully roll the DR 13 HP CHIPPER from the shipping pallet, resting
it on the front frame support.
4. Compare the contents of the shipping carton and the plastic bag with the Parts Supplied list on the
previous page. If any of the parts are missing, contact 1-800-DR-OWNER (376-9637). Do not discard
the pallet until you are fully satisfied with your new DR 13 HP CHIPPER.