Codabar length 1, length 2 program, Ming instructions, Ing the – Datalogic Scanning MAGELLAN 3200VSI User Manual
Page 134: Codabar length 1, length 2 pro, Gramming instructions, Codabar length 1, length 2, Programming instructions, Codabar — continued
Advertising
Symbologies
126
Magellan
TM
3200VSi
Codabar Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
and scan the two digits (zero padded) representing
the length in decimal notation.
4. Scan the END bar code.
NOTE
For Codabar bar codes, all start, stop, check
and data characters are included in the length
calculations.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 03
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50
Advertising