Datalogic Scanning MAGELLAN 3200VSI - Manual (Page 194)

186
Magellan TM 3200VSi
microSD Function Summary
The following table summarizes various functions of micro SD card.
* Contact tech support for any available feature upgrade license.
microSD Function Details
From Scanner to microSD Card
Capture and save an image to a micro SD card by scanning a label.
1. Insert the micro SD card into the scanner
2. Scan the Capture Label
The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.
Press the Remote Camera Button if the scanner has this optional accessory connected. Otherwise, wait for 5
seconds and the scanner will automatically capture and save the image to the micro SD card.
4. Upon scanner audio indication of completion, an image is saved to the micro SD card.
FUNCTION
Image
Capture
Export
Status
Export
Configuration
Load
Applic
Load
Config
Load
CPLD
Code
Feature
Upgrade*
Direction
Scanner

micro SD
Card
  
micro SD Card

Scanner
   
Initiated by
Scanning a label
 
Autorun.dls file in micro
SD card      
NOTE
The image file name range is from image000 to image999. if the same name already
exists in the micro SD card, the scanner skips that name and uses the next. For exam-
ple, if image000.jpg is already used in the micro SD card, the scanner uses
image001.jpg. The time stamp is not real, since scanner does not have a real time
clock.
Image format (.bmp, .jpg), image size (VGA, WVGA, Full size), Brightness (0~9), con-
trast (0~9), and JPG compression ratio (0~100) are defined in configuration.