Aztec length 1, length 2 programming instructions, Wing the, G the – Datalogic Scanning MAGELLAN 3200VSI User Manual
Page 159: Aztec length 1, length 2 program, Ming instructions, Ing the, Aztec — continued
Advertising
2D Symbologies
Product Reference Guide
151
Aztec Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
and scan the four digits (zero-padded) representing
the length.
Scan the END bar code.
NOTE
For Aztec labels, only the data characters are included in the length cal-
culations.
Any value set higher than 3700 will be considered to be 2710.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 2710
Advertising