Datalogic Scanning MAGELLAN 3200VSI - Manual (Page 14)

Getting Started
6
Magellan TM 3200VSi
LED and Beeper Indicators
The scanner’s beeper sounds and its green LED illuminates to indicate various functions
or errors on the scanner. The tables below list these indications. One exception to the
behaviors listed in the tables is that the scanner’s functions are programmable, and may
or may not be turned on. For example, certain indications, such as the power-up beep
can be disabled using programming bar code labels.
Green LED Indications
LED
INDICATION
INDICATION COMMENT
Power-on
indication
Bright green flash
Indicates the scanner has finished all its power up tests and is
now ready for operation.
Good Read
Indication
Bright green flash Indicates a bar code has been read and decoded.
Scanner Ready Constant dim green
The scanner is ready for operation. The LED is also configu-
rable to off when idle and ready for operation
Sleep Mode
Green LED slowly and continu-
ously changes from off to dim to
off.
The scanner is in Sleep Mode. To wake the scanner up, move
an object in front of its window or press the button atop the
unit. This indication is optionally configurable and may have
been programmed to behave differently.
Host Disable
Constant green flash at 1 Hz
(100mS on, 900mS off) The scanner is disabled due to receiving a disble command
from the POS terminal.
Diagnostics
Varies (see Error Codes on
page 3 for more information)
The LED can provide diagnostic feedback if the scanner dis-
covers a problem during SelfTest.
Prog. Mode See Host Disable above. The scanner is in Programming Mode.