Wing the, G the, Qr code length 1, length 2 pro – Datalogic Scanning MAGELLAN 3200VSI User Manual
Page 153: Gramming instructions, Ing the, Qr code — continued
Advertising
2D Symbologies
Product Reference Guide
145
QR Code Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
and scan the four digits (zero-padded) representing
the length.
Scan the END bar code.
NOTE
For 2d Code labels, only the data characters are included in the length
calculations.
Any value set higher than 2710 will be considered to be 2710.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 2710
Advertising