Datalogic Scanning MAGELLAN 3200VSI - Manual (Page 39)

Product Reference Guide
31
Chapter 3
Image Capture
Image Capture
How to Capture an Image
There are two methods of capturing images as discussed below:
• Image Capture to a microSD Card by Scanning a Special Label
• Image Capture to the Host by Host Command
Image Capture to a microSD Card by Scanning a Special Label
Insert a micro SD card into the scanner, scan a capture label and place the item to be captured in
front of the scanner. If an optional Remote Camera Button is connected to the auxiliary port,
then press the Remote Camera Button to write an image to the microSD card. If no Remote
Camera Button is connected, the image will be written to the micro SD card five seconds after
scanning the capture label.
The format, size, contrast, brightness and compression use the configured values.
This Capture label format is as follows:
<FNC3>IMAGEFAUTO<CR>
The image filename is automatically increased from image000 to image999.
The date image file generated is not actual, since no real time clock is embedded in the scanner.
NOTE
The Capture label will not read unless a microSD card is inserted.