Faronics Deep Freeze Mac - Manual (Page 49)

Using Deep Freeze Remote
|
49
Deep Freeze Mac User Guide
• Select Shutdown After Maintenance to shut the computer down after the Maintenance Period
is complete.
• Select Show message x minutes before maintenance starts to provide a message to users
warning them that the computer will be taken over at a specified time, and enter the warning
time in the field provided. Use the text box to enter a custom message for the user, explaining
that the Maintenance Schedule will take place at a specified time; by inserting %d as a variable
into the message, Deep Freeze will automatically display the number of minutes until the
Maintenance Period begins. (Again, %d is a variable corresponding to the number of minutes
between the current time and the time that scheduled Maintenance will begin.)
3. Click Send.
4. Select if you want to Allow users to save files and restart, Restart immediately (changes to
unsaved files will be lost) or Don’t restart (the action will take effect only after a restart).
5. Click OK.
Click Export to export the maintenance schedule. Click Import to import a previously exported
maintenance schedule.
License
1. Select the computers from the Computers pane and click License.
2. Specify the Deep Freeze License Key.
3. Click OK.
Install
1. Select the computers from the Computers pane and click Install.
2. Click Choose to browse and select the installer.
3. Click Install.
4. Select if you want to Allow users to save files and restart, Restart immediately (changes to
unsaved files will be lost) or Don’t restart (the action will take effect only after a restart).
5. Click OK.
The minimum time allowed for a Maintenance Period is 10 minutes.
There is a minimum 10 minute interval required between schedules.
Ensure sufficient time for the maintenance activity to complete. Insufficient time
will lead to the failure of the update.
All schedules sent to the selected computers will replace the existing schedules.