Typical display – Flowserve UEX Limitorque User Manual
Page 35
Advertising
35
Limitorque UEX FCD LMENIM1205-03-AQ – 05/15
flowserve.com
Figure 10.1 – Normal and Diagnostic Displays
50% OPEN
STATUS OK
Normal Display - STATUS OK confirms that the actuator
is suitable for remote operation.
Typical Display
ENCODER
(FAULT) NEXT?
Diagnostic Display informs user of failed hardware.
50% OPEN
MOTOR OVERTEMP
Normal Display/Alarm Condition - If the actuator is not suitable
for remote operation, the appropriate alarm will be shown.
Advertising