Dish Network 112182 - Manual (Page 19)

Page 13
Quick Tour of DishDVR Features
12. Press the VIEW button to go back right away to the program in
progress.
13. Press the RECORD button to start recording the program right now.
14. The Start Recording Options menu displays. Select Manual
user stop . See page 48 for an explanation of the other
recording options.
15. Select Done to start recording the program. Notice the receiver’s front
panel RECORDING light turns on.
16. If you want, press the STOP button. This stops the receiver
from recording the program.
Notice the receiver’s front panel RECORDING light turns
off.
17. Now, if you want to take the time, use the Program Guide to find
another program set to start in the next few minutes.
Note : Start watching the program when it starts. Watch the program for
a few minutes.
18. Press the BACK button to reverse the program.
Note : Let the program reverse all the way to its start.
19. Press the RECORD button. The receiver stores a
recording of all of the program broadcast so far, and keeps on
recording the program. You can record all of the program,
even though you didn’t start recording until after the program
started.
20. Press the DVR button. This opens the Recorded Events
menu on the TV screen.
Note : Even though the button on your remote control may be
marked DVR or PVR, the remote control works the same way.
Tip: The
DishDVR
features let you
record
programs
without using a
VCR!
This is
important: If
you don’t tune
to a program
until after it
starts, you can
record only the
part of the
program that
comes after
you tune to it.