Dish Network 112182 - Manual (Page 29)

Page 23
Remote Control
Page 23
Power Buttons
Press the blank POWER button to turn the receiver on or off.
Use the TV POWER button to turn the TV on or off. See Set Up
the Remote to Control Other Devices for instructions on
programming the remote to control your TV.
Menu Button
Press this button to open the Main Menu .
TV/Video Button
If you connect a second video source, such as cable or a broadcast
antenna, to the receiver’s back panel TV A
NTENNA /C ABLE I N
port, you can use this button to switch the receiver between the
satellite signal and the another video signal.
Note : The signal from the second video source will only be available on the
TV S ET O UT port, not on the S-V IDEO or RCA output connectors.
Page Up and Page Down Buttons
Press the PAGE UP button or the PAGE DOWN button
to scan, page by page, through the
Program Guide , a
Themes list, a Favorite List , an Event Timers list, or a
list of channels.
Mute Button
Press this button to turn the TV sound off or on. To use this
button, you must set up the remote to control your TV. See Set Up
the Remote to Control Other Devices for instructions.
Volume Button
Press this button to change the TV volume. To use
this button, you must set up the remote to control
your TV. See Set Up the Remote to Control Other
Devices for instructions.
Guide Button
Press this button to open the Program Guide . When you have
the Program Guide open, press this button again to change the
Favorites Lists.
Arrow Buttons
• Press these buttons to highlight an option in
the menus, the Program Guide, and the
Browse Banner.
• While watching a program, press the UP or
DOWN ARROW button to change channels.
• While watching a program, press the
BROWSE button (the RIGHT ARROW
button) to open the
Browse Banner .
Tip: The Guide
button opens
the Program
Guide. Use it
to get
information on
programs that
are on now
and that will
be on in the
future.