Dish Network 112182 - Manual (Page 22)

Chapter 2
Page 16
Parts of the System
Arrow Buttons
Use the ARROW buttons to move a menu
highlight to an option or a program.
Use the UP and DOWN ARROW buttons to
change channels while watching a program.
When watching a program, pressing the LEFT
ARROW button opens the
Themes menu and
the RIGHT ARROW button opens the Browse
Banner .
Select Button
Press the SELECT button to select an item you highlight in a
menu.
Sys Info Button
Press the SYS INFO button to open the Important System
Information menu.
Power Button
Press the POWER button to turn the receiver on or off.
Power Light
The POWER LED lights up when you turn the receiver on
and turns off when you turn it off.
Note: Even when the POWER light is off, the receiver
continues to work and requires power. Don’t unplug the
receiver unless you need to move it!
Recording Light
The RECORDING LED lights up whenever you
are recording a program.
IR Sensor and IR Blasters
The IR SENSOR receives IR signals from the remote control. For
information on the IR BLASTERS, please see Control a VCR on page 56.
Tip: First, you
move the
highlight to an
item with the
Arrow buttons,
and then you
press the
SELECT
button to
select that
item.