Dish Network 112182 - Manual (Page 27)

Page 21
Remote Control
Page 21
Remote Control Batteries
The remote control comes with AAA batteries. When you replace old
batteries, you should replace all of the batteries. Use batteries of the same
kind, for example alkaline or carbon zinc, and don’t mix batteries of
different kinds. Alkaline batteries last longer.
Changing the Batteries
1. Press down on the battery cover’s top latch and
lift the cover off.
2. Take out all of the old batteries.
3. Put the new batteries in. Make sure you match the
plus (“+”) ends with the plus markings on the
battery case.
4. Fit the battery cover’s bottom tab back into the
slot at the bottom of the battery case, and snap the
cover back into place.
Low Battery Warning
When you see a low battery warning message on the bottom line of the
Program Banner, the batteries in your remote control are weak and need
to be replaced.