Dish Network 112182 - Manual (Page 82)

Chapter 3
Page 76
Using the System
Up/Down Buttons
Use these buttons to change channels on the cable box.
Select Button
Press the Select button in place of the ENTER button for the cable
box.
Recall Button
Press this button to go back to the last cable box channel you used.
Press it again to switch between the last two cable box channels
you used.
Number Buttons
Use these buttons to enter channel numbers.
Control a Tuner or Amplifier
Only the buttons described here control a tuner or amplifier.
Some of the buttons described here may not control your tuner
or amplifier. Please see the user’s manual that came with your
tuner or amplifier for more information.
AUX Mode Button
You must first set up the remote to control the device. See Set Up the
Remote to Control Devices, beginning on page 68. Then, you must
press the AUX mode button to set the remote to AUX mode. The AUX mode
button flashes once to show you’ve set the remote to AUX mode. Make sure
you keep the remote in AUX mode to use the buttons described here.
Power Button
Press the blank POWER button to turn the tuner or amplifier on
or off. Press the TV power button to turn the TV on or off