Dish Network 112182 - Manual (Page 57)

Page 51
Use Event Timers
Page 51
Set an Automatic Event Timer
1. Highlight and select a future program in the Browse Banner , in the
Program Guide, or in a Themes list.
This opens the Create an Event Timer menu.
2. Select a Timer Type option. A check mark
shows up next to the option you select. For
example, here we selected the
DVR option.
3. Select a Timer Frequency option. A check
mark shows up next to the option you select.
For example, here we selected the
Once
option.
4. Only for a Once (one-time), DVR Event Timer,
you can select the Protect Recording check
box. If you do this, a check mark shows up in
the box.
Note : When you protect a recorded program, the receiver will ask you
before it records over that program.
5. Select the Create option to set the event timer. You’ll see a clock picture
on the program in the Program Guide , and also when you press the
INFO button to get information about the program.
Tip: You can
protect any
recording so
that the
receiver will
not record
over it
without
asking you
first. Just
select Protect
Recording on
the Create an
Event Timer
menu.