Fluke Biomedical 10100AT - Manual (Page 19)

Operation
Introduction
2
2-1
Section 2
Operation
2.1 Introduction
Operation of the Model 35050AT Dosimeter may be divided into two general categories: front panel
operation and RS-232 bus operation. This section contains information necessary to use the instrument
from the front panel. Note that many of these functions can also be programmed over the RS-232 bus,
as described in the Model 35050A Programmer's Instruction Manual.
The following paragraphs contain a complete description of the Model 35050AT Dosimeter front panel
operation. First a complete description of each front panel function is presented. Next the complete
procedure for each of the measuring functions is presented.
2.2 Front Panel Familiarization
The front panel of the Model 35050AT Dosimeter is shown in Figure 2-1. The front panel may be divided
into two sections: control buttons and display. The following paragraphs describe each of these items in
detail.
Figure 2-1. The Model 35050AT Dosimeter Front Panel