Fluke Biomedical VT Mobile Getting Started - Manual (Page 11)

1
Getting Started Manual
Introduction
This Getting Started Manual provides basic information
on the Fluke Biomedical VT MOBILE Gas Flow Analyzer
(hereafter referred to as the Analyzer.) Refer to the
Operators Manual provided on the CD for complete
operating instructions.
Seven language options support the available factory-set
versions of the
Analyzer. These are identified by the
overlay language, as described in Table 1.
The Analyzer is a general-purpose, portable gas flow
analyzer with special modes designed specifically for
testing mechanical patient ventilators. The Analyzer
measures bi-directional flow in both high and low ranges
as well as high and low pressure ranges. Not for use in
the patient environment.
Unpacking the VT MOBILE
Referring to Table 2, unpack the Analyzer and its
accessories from the shipping carton. Identify accessories
for your Analyzer with the aid of Table 3 and Figure 1.
Check for missing parts. Carefully inspect the unit for
damage, such as cracks, dents, or bent parts. If items are
missing or any physical damage is apparent, call Fluke
Biomedical for assistance. For information on ways to
contact Fluke Biomedical, see the section in this manual
called “Support.” Also, notify the carrier if the damage
appears to be the result of a shipping mishap.
Maxtec oxygen sensor distributed by Fluke Biomedical.