Fluke Biomedical VT Mobile Getting Started - Manual (Page 2)

Warranty
Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and workmanship for one full year from the date of original purchase.
During the warranty period, we will repair or, at our option, replace at no charge a product that proves to be defective, provided you return
the product, shipping prepaid, to Fluke Biomedical. This warranty does not apply if the product has been damaged by accident or misuse or
as the result of service or modification by other than Fluke Biomedical. IN NO EVENT SHALL FLUKE BIOMEDICAL BE LIABLE FOR CON-
SEQUENTIAL DAMAGES.
Only serialized products and their accessory items (those products and items bearing a distinct serial number tag) are covered under this one–year
warranty. PHYSICAL DAMAGE CAUSED BY MISUSE OR PHYSICAL ABUSE IS NOT COVERED UNDER THE WARRANTY. Items such as cables
and nonserialized modules are not covered under this warranty
Recalibration of instruments is not covered under the warranty.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state, province to province, or country
to country. This warranty is limited to repairing the instrument to Fluke Biomedical’s specifications
.
Warranty Disclaimer
Should you elect to have your instrument serviced and/or calibrated by someone other than Fluke Biomedical, please be advised that the original war-
ranty covering your product becomes void when the tamper-resistant Quality Seal is removed or broken without proper factory authorization. We
strongly recommend, therefore, that you send your instrument to Fluke Biomedical for factory service and calibration, especially during the original
warranty period. (When returning the product for any reason, be sure to follow the “Return Procedure” in “Standard Terms and Conditions” in the sec-
tion in the Operator’s Manual called “Notices.”)
In all cases, breaking the tamper-resistant Quality Seal should be avoided at all cost, as this seal is the key to your original instrument warranty. In the
event that the seal must be broken to gain internal access to the instrument, you must first contact Fluke Biomedical’s Technical Assistance Depart-
ment at 775-883-3400. You will be required to provide the serial number for your instrument as well as a valid reason for breaking the Quality Seal. You
should break this seal only after you have received factory authorization. Do not break the Quality Seal before you have contacted us. Following these
steps will help ensure that you will retain the original warranty on your instrument without interruption.
Manufacturing Location
The VT MOBILE is manufactured in Everett, WA, USA.