Fluke Biomedical VT Mobile Getting Started - Manual (Page 9)

vii
WXWarning. Read before using Analyzer.
To avoid personal injury, follow these guidelines:
ƒ Do not use the VT MOBILE in any manner not specified in the Operator’s Manual. Otherwise,
the protection provided by this product may be impaired.
ƒ When measuring oxygen, always keep all components of test setup well away from open
flame or other combustion-starting devices.
ƒ Use in well-ventilated space. Be aware that a gas defined with VT for Windows software as
‘User’ may be unknown while using the VT MOBILE.
ƒ For high pressure measurements, always turn off gas source before connection or discon-
nection of VT MOBILE. Be aware that there is no pressure indication on the VT MOBILE
screen when VT for Windows software is in control.
• Always press power off on the VT MOBILE and unplug the battery eliminator before cleaning
the outer surface.
• Inspect the product, if the instrument appears damaged or appears to operate in a manner
not specified in the manual, DO NOT CONTINUE USE. Return the product for service.
• Avoid spilling liquids on the analyzer; fluid seepage into internal components creates corro-
sion and a potential shock hazard. Do not operate the instrument if internal components are
exposed to fluid.
• Do not open this product. There are no user replaceable parts.