FSR DV-MFSW-94 - Manual (Page 24)

24
8 Firmware Upgrade Instructions
You will need Windows HyperTerminal to complete the firmware upgrade. Vista and Windows 7 do not
provide this program, but it is a free download.
Here is one of many links to get it:
http://files.digitizor.com/wp-content/uploads/2009/08/hyperterminal1.zip
Connect the DV-MFSW-94 to the PC via USB cable (provided) or a DB-9 serial cable. Open a
HyperTerminal session and create a new connection called “DV-MFSW-94”.
When you click “OK” the “Connect To” dialog box will open.
From the “Connect using” drop-down menu select the newest COM port listed. This item was automatically
added to the list when the DV-MFSW-94 was connected to the PC and restarted.
When you choose “OK” the “COM port properties” dialog will automatically open. Set as follows:
Baud Rate: 115200bps, Data bits: 8bit, Stop bits: 1bit, Parity: disable, Flow control: None
If you have any questions call Tech Support at 973-785-4347:
Then follow these menus:
File
Properties choose the “Settings” tab from the properties dialog click the ASCII Setup button.
DV-MFSW-94