FSR DV-MFSW-94 - Manual (Page 9)

9
4 Operation
1. MAIN MENU
 Displays the timing (Resolutions) information of Inputs and
Outputs to output
 Displays the timing (Resolutions) information of each output
channels using Left/Right arrow buttons.
2. MENU LIST
 Press Menu button to get the list of Menus.
 Select the function using UP/Down buttons
 Press Enter button to go into more detail set up of the selected function.
3. OUTPUT CREATE SETUP
 This section is to route Input Channels to outputs.
 Select Output Channel using Left/Right buttons.
 Select Input Channel using Up/Down button, and press Enter
button to save.
※ Will display Input Config and Output Audio Config according to above channel selection.
4. INPUT CONFIG SETUP
This section is for setting up input configurations:
 Selecting Audio sources thru input Channel 1 – 4
0: Auto Audio – Automatically detects audio input
1: HDMI Audio – HDMI Source Audio.
2: STEREO Audio – External Input Audio.
 Selecting Video sources thru Input Channel 5 – 7
0: CAT-X IN 1: FIBER IN SET
 Select Analog video sources thru Input Channel 8 – 9
0: VGA 1: YPbPr 2: CVBS 3: S-Video

Select the input channel using Left / Right buttons.
 Select the source using up / down button, and press enter button to save.
5. OUTPUT TIMING SETUP
This section is for setting up Output Channel Timing (Resolutions):
 Selecting the output channel using the Left / Right buttons.

Select the timing number using the up / down buttons, and press
enter button to save.
※ Auto Time Set – CR94 read display such as TV, monitors EDID (if no picture, select default setting;
720p1080i)
* OUTPUT INFO VIEW *
[ OutPut: 1 2 3 4 ]
[ Input : 1 4 7 9 ]
[ 1920 x 1080p 60 ]
→1.OUTPUT CREATE
2.INPUT CONFIG
3.OUTPUT TIMING SET
4.OUTPUT AUDIO SET
→5.STEREO AUDIO SET
6.PRESET
7.PRODUCT ID
8.RS232C CONFIG
→9. LAN CONFIG
10. INPUT EDID SET
11.INPUT INFO
12.SOFTWARE-
UPGRADE
-OUTPUT CREATE MODE-
[ OutPut: 1 2 3 4 ]
[ InPut : 1 4 7 9 ]
[ HDMI/DVI & AUDIO ]
-INPUT CONFIG SETUP-
[ 1 2 3 4 →]
[ 2 0 1 2 ]
[ 2:Stereo Audio ]
- OUTPUT TIMING -
[OutCH: 1 2 3 4 ]
[TimNo: 0 2 2 1 ]
[ Auto Time Set ]