GAI-Tronics LE200-RM Rack-Mount Page/Party Line Extender - Manual (Page 17)

Pub. 42004-392G
M ODEL LE200-RM R ACK -M OUNT P AGE /P ARTY
®
L INE E XTENDER P AGE 15 of 56
e:\standard ioms - current release\42004 instr. manuals\42004-392g.doc
09/14
Audio Line Muting
In some system configurations, the Page/Party ® system cable is not connected to the Line Extender. In this
case, all audio lines (page and party lines 1–5) should be muted since they are not physically connected.
DIP switch SW6 position 4 on the Main PCBA enables this feature. If this feature is enabled, it is
unnecessary to disconnect the audio lines using the audio line relays (mentioned above). Refer to Figure 6
for the location of SW6 on the Main PCBA and Table 14 below for setting options.
Table 14. Audio Line Mute Setting on Main PCBA
SW6-4 Mute Analog Lines Setting
Open* Disabled - Party lines 1–5 and page line are operational.
Closed Enabled - Party lines 1–5 and page line are muted.
N OTES : 1. Changes to this parameter take effect without cycling power.
2. *Indicates default position.