GAI-Tronics 12509-037 Telephone Management Application (TMA) Installation Bulletin (Ver. 7.3.3 and newer) - Manual (Page 2)

Pub. 42004-447A
Telephone Management Application (TMA) Installation Bulletin Page: 2 of 19
f:\standard ioms - current release\42004 instr. manuals\42004-447a.doc
04/11
TMA Product Package
Upon receipt of a TMA product, inspect the contents of the carton to ensure the following items are
included:
Table 1. TMA Product Packages
Item
Description Model 12509-037
TMA Application
Package Model 12509-036
TMA Line
Expansion Kit
44008-004 TMA DTMF Transceiver Unit
„ „
44306-7xx CD-ROM
„ „
49186-005 Security Key
„
61007-007 Cable Assembly, 4-conductor
„ „
61007-044 USB Cable
„ „
Component Descriptions
The TMA DTMF Transceiver is used to interface the PC running the TMA application and dedicated
PABX telephone line. The DTMF Transceiver is a black plastic box with sloped sides measuring 5.50 L
×
5.25 W
× 1.75 D inches. The front of the unit has three LEDs and the rear has one USB type “B” jack,
and one RJ11 jack.
The CD-ROM contains all the files to be installed on a PC that are required to run the TMA application
and the TMA User Guide.
The USB Security Key provides the necessary hardware security for the Administrator account access to
the TMA application. The USB Security Key has the appearance of a USB flash drive (or memory stick).
The USB cable is used to interconnect the PC running the TMA application with the DTMF Transceiver.
The cable is equipped with a USB type “A” plug at one end for connection to a USB port at the PC, and a
USB type “B” plug at the other end for connection to the DTMF Transceiver.
The telephone line cord is used to connect the DTMF Transceiver to a dedicated PABX telephone line.
The telephone line cord is equipped with an RJ11 plug at each end and is approximately 7 feet in length.