Off-hook ringing – GAI-Tronics 295-001W, 295-001F Analog Clean Phone User Manual
Page 26
P
UB
.
42004-484E
A
NALOG
C
LEAN
P
HONE
®
T
ELEPHONES
P
AGE
26 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-484e.docx
01/15
Off-Hook Ringing
The telephone can generate a ringing signal from the speaker when the telephone is called. The factory
default setting for this feature is “disabled.”
N
OTE
: In addition to enabling this feature, the Auto-Answer feature must also be enabled for proper
operation.
Table 7. Off-Hook Ringing
Feature
Key
Sequence
Description
Default
Off-Hook
Ringing
# 2 2 L
Enabling the Off-Hook Ringing feature allows a person to call the
telephone and have the telephone function as a normal telephone.
The telephone will ring after the splash tone is heard in the receiver
if remote programming is not commenced within 7 seconds of the
splash tone.
To enable the ringing feature (enable splash tone and ringing), L=1.
To disable the ringing feature (only splash tone on the phone), L=0.
N
OTE
: Only Clean Phone
®
Telephones equipped with a CALL
push button can be answered when they are ringing by pressing the
push button.
0
(Disabled)