GAI-Tronics 295-001W, 295-001F Analog Clean Phone - Manual (Page 31)

P UB . 42004-484E
A NALOG C LEAN P HONE
®
T ELEPHONES P AGE 31 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-484e.docx
01/15
SMART Mode Programming
TMA Software is designed to remotely program Clean Phone ® Telephones for SMART mode operation.
Although they can be locally programmed for SMART operation, there is no advantage to having a Clean
Phone
® Telephone set up for SMART mode without having TMA installed.
Clean Phone ® Telephones installed in systems that will have TMA operational at a later date are
recommended to be programmed for Standard Mode operation. Upon installation of TMA, the installed
telephones can be reprogrammed from the TMA PC.
Maintenance
WARNING
This product can contain hazardous voltages. Always remove power to this
station prior to servicing.
General Information
1. Inspect and replace frayed or cracked wiring.
2. Secure/replace loose wires and terminal lugs.
3. Remove corrosion from terminals.
Service
If your Clean Phone ® Telephone requires depot service, contact your Regional Service Center for a return
authorization number (RA#). Equipment should be shipped prepaid to GAI-Tronics with a return
authorization number and a purchase order number. If the equipment is under warranty, repairs will be
made without charge. Please include a written explanation of all defects to assist our technicians in their
troubleshooting efforts.
Call 800-492-1212 inside the USA or 610-777-1374 outside the USA for help identifying the Regional
Service Center closest to you.