GAI-Tronics 295-001W, 295-001F Analog Clean Phone - Manual (Page 5)

P UB . 42004-484E
A NALOG C LEAN P HONE
®
T ELEPHONES P AGE 5 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-484e.docx
01/15
Features
The Clean Phones ® offers the following features:
 Two auto-dial push buttons
 “Flash” push button to access features of the telephone system
 “On/off” push button with keypad for standard telephone operation
 Completely smooth front panel with chemical resistant overlay
 Auto-answer capability
 Oversized buttons for easy use with gloved hands
 Two programmable auxiliary outputs for peripheral control
 Standard or SMART operation
 UL/CSA 60950 compliant
 FCC Part 68 Certified
Auto-Dial Buttons
The Model 295-001x Series Clean Phones ® feature two auto-dial buttons to store frequently dialed
telephone numbers. If using the auto-dial feature, it is important to program the Auto-dial Time Delay
option, which sets the amount of time lapse between the auto-dial button press and the actual dialing
operation. The default time period of 10 seconds could be too long if the feature is to be used for
emergency communication. This feature is fully explained in the “Programming Information” section.
Flash Button
A “Flash” button is provided to enable the flash features of the PBX on telephone system. This button is
labeled
FLASH/AUTO-DIAL 3
.
Auto-Answer
The Model 295-001x Series Clean Phones ® also offer a programmable activation/deactivation of the
Auto-answer feature. When activated, this feature allows the telephone to go off-hook automatically so
personnel do not have to leave their work stations to answer the telephone. All Clean Phones
® are factory
programmed for auto-answer.
A light under the ON portion of the ON/OFF button is activated to indicate if the telephone is off-hook.
If the Auto-answer feature is not activated, the telephone will not go off hook until someone actually
presses the ON portion of the button.