GAI-Tronics 295-001W, 295-001F Analog Clean Phone - Manual (Page 7)

P UB . 42004-484E
A NALOG C LEAN P HONE
®
T ELEPHONES P AGE 7 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-484e.docx
01/15
Operation
Placing an Autodial Call from an Analog Clean Phone ®
To place an autodial call:
1. Press the desired autodial push button to place an immediate call to a preprogrammed number.
2. When the call is connected, the hookswitch indicator will light.
3. The call is terminated by the following: pressing the ON/OFF push button, or the receiving caller
hanging up, or the defined timeout of the call duration.
Placing a General Telephone Call
To place a general telephone call:
1. Press the ON/OFF push button.
2. Wait for the dial tone.
3. Use the keypad to dial the desired number.
4. When the call is connected, the “off-hook” indicator will light.
5. The call is terminated by one of the following methods: pressing the ON/OFF push button, the
receiving caller hanging up, call duration timeout.
Receiving a Call
When a Clean Phone ® is called, the unit automatically goes off-hook (auto-answer) and a conversation
can take place. This is the default mode operation. The Clean Phone ® can be programmed for manual
answer, if desired. Refer to the Off-Hook Ringing setting.