Installation of new bezels – Gasboy 9800 Atlas User Manual
Page 11
MDE-4687 Weatherproofing Instructions for Atlas™ 9800 Units · August 2007
Page 11
Installation of the Weatherproofing Kit
4
Carefully apply the Gasket Strip to the front surface of the Rain Gutter. See
Figure 11: Application of the Gasket Strip
5
Wipe away any excess sealant when finished.
6
Repeat steps
to
for the other side of the unit.
Installation of New Bezels
To install the new bezels, proceed as follows:
Note: If the unit has the TopKAT option, complete the steps in
before installing new bezels.
The improved bezels have neoprene gaskets around all the lenses, and also between the dial
face and the bezel. The screws have been sealed. Additionally, a bulb gasket has been factory
installed along the top edge of the bezel.
Figure 12: Improved Bezels with Neoprene Gaskets